10 فروردین 1403

علی صابری مهر

مرتبه علمی: دانشیار
نشانی: بناب-دانشگاه بناب
تحصیلات: دکترای تخصصی / مهندسی مکانیک
تلفن: 04137745000
دانشکده: دانشکده فنی و مهندسی
گروه: گروه مهندسی مکانیک

مشخصات پژوهش

عنوان
Thermodynamic analysis of employing ejector and organic Rankine cycles for GT-MHR waste heat utilization: A comparative study
نوع پژوهش مقاله چاپ شده
کلیدواژه‌ها
GT-MHR Cogeneration Ejector ORC Exergy Waste heat
پژوهشگران امیر سرورالدین (نفر اول)، علی صابری مهر (نفر دوم)، سید محمد سید محمودی (نفر سوم)، مرتضی یاری (نفر چهارم)

چکیده

The waste heat from intercooler and pre-cooler of the gas turbine-modular helium reactor (GT-MHR) is utilized to drive organic Rankine and ejector refrigeration cycles for performance enhancement, in three different configurations. Meanwhile, a new 2D model is developed for the ejector to predict its performance more accurately. The cycles’ performances are analyzed from the viewpoints of both the first and second laws of thermodynamics. The results of optimization revealed that; one of the configurations is more efficient than the other ones from the viewpoint of first law of thermodynamics. In this configuration, at turbine inlet temperature of 850 o C the first law efficiency is 15.86% higher than the GT-MHR cycle and the fuel energy saving ratio (FESR) could be up to 20.06%. Another configuration is found to be the most effective (among the three) from the exergy utilization perspective. In this layout, the exergy efficiency is around 2.6% higher than that of the GT-MHR. Through parametric study, the effects of some important parameters such as turbine inlet temperature, pinch point temperature difference as well as the compressor pressure ratio, on the systems’ performances are investigated in detail. The results also showed that the compressor pressure ratio under optimized condition is higher for the configuration with the highest first law efficiency. This point can be accounted as an economic drawback for the configuration. Exergy analyses revealed that the compressor or recuperator (depending on the configuration) has the second highest exergy destruction after the reactor.