Ternary blends based on polyamide 6 (PA6)/ acrylonitrile-butadiene rubber (NBR)/polycarbonate (PC) were prepared by melt compounding via extrusion process. The effect of organoclay (OC), compatibilizer, and blend ratio was investigated on structural and mechanical properties of the blend. The effect of OC and compatibilizer studied on crystallization temperature, melting temperature, and crystallinity of PA6/ NBR/PC ternary blends was studied by differential scanning calorimetry. Improvement in the crystal structure of compatibilized blend compared to unfilled blend was observed by polarized optical microscope. Dispersion of OC into PA6/NBR/PC ternary blends was done by X-ray diffraction, transmission electron microscopy, and scanning electron microscopy (SEM)/energy-dispersive X-ray. The results confirmed the exfoliation of OC particles into the polymer matrix. The improvement in yield stress and tensile modulus of the ternary blend was observed in the presence of OC. The impact strength showed an increase using NBR-glycidyl methacrylategrafted (g-GMA) to prepare compatibilized PA6/NBR/PC ternary blend.
