The combination of silicone rubber (SR) and ethylene-propylene-diene monomer (EPDM) could have an aggregate of their properties. High temperature vulcanized (HTV) is one of the most widely used SR type. This study explores the impact of montmorillonite Cloisite® layered silicate nanoclay on the vulcanization characteristics, mechanical-dynamical behavior, and thermal properties of the HTV/EPDM blend. For this purpose, varying ratios of the HTV/EPDM compounds were prepared in the range of 100/0, 50/50, and 0/100, with 0, 3, and 5 wt% of Cloisite® using an internal mixer. The X-ray diffraction results indicate that the mixing time, Cloisite® content and base polymer significantly influence the distance between Cloisite® layers. Cloisite® was found to accelerate the curing system and reduce the difference between minimum and maximum torque. The mechanical analysis of the prepared HTV/EPDM/clay nanocomposites revealed an increase in hardness, tensile strength, and modulus for samples with applied Cloisite® content. The degradation temperature was raised in HTV base samples by the presence of Cloisite®. On the other hand, the degradation temperature was dropped in the EPDM base samples as the amount of Cloisite® increased. In the HTV/EPDM/clay compounds, the degradation temperature was between the degradation temperatures of pure HTV and EPDM rubbers.
