2025 : 10 : 14
فارسی
Mohammad Ali Mohtadi Bonab

Mohammad Ali Mohtadi Bonab

Academic rank: Professor
ORCID: https://orcid.org/0000-0003-2120-3053
Education: PhD.
ScopusId: https://www.scopus.com/authid/detail.uri?authorId=55700057500
HIndex: 26/00
Faculty: Faculty of Engineering
Address:
Phone: 04137745000
Home

Education

  • PhD. in Mechanical Engineering , University of Saskatchewan , Canada (2012 - 2015)
    Thesis title:
  • MSc. in Mechanical Engineering , Iran University of Science and Technology , Iran (2000 - 2002)
    Thesis title:
  • BSc. in Mechanical Engineering , University of Tabriz , Iran (1996 - 2000)
    Thesis title:
More

Courses

Bachelor Of Science
Master Of Science

Research activities

Journal Papers
Effect of Hybridization on the Dynamic Characteristics of Carbon/Basalt Fiber-Reinforced Polymer Composites Exposed to Repeated Low-Velocity Impact Farzin Azimpour shishevan, Mohammad Ali Mohtadi Bonab, Bahman Rahmatinejad (2025)
Optimization and finite element analysis of an aluminum piston in the Peugeot XU7JPL3 engine for enhanced efficiency and durability Davoud Jahani, Mohammad Ali Mohtadi Bonab, davoud jahani (2025)
Enhancing Wear Resistance and Mechanical Properties of Eutectoid Pearlitic Steel through Low-Temperature Annealing: Microstructural Transformations and Performance Implications in Railway Applications Gustavo Tressia, L.H.D. Alves, Hélio Goldenstein, Carlos Grandini, Mohammad Ali Mohtadi Bonab, Mohammad Masoumi (2025)
A new approach based on a concurrent cooling method during GTAW and DC-LSND welding to mitigate residual stresses in Al 6061-T6 Hamed Hemmatpour, Mohammad Ali Mohtadi Bonab (2024)
Experimental study on the optimal combination of MWCNT and GNP-introduced carbon/basalt fiber-reinforced intra-ply hybrid composites by Taguchi method Farzin Azimpour shishevan, Bahman Rahmatinejad, Mohammad Ali Mohtadi Bonab (2024)
Investigation of mechanical and wettability properties of commercial pure titanium by surface mechanical attrition treatment Saeed Alikhani Chamgordani, Mohammad Ali Mohtadi Bonab, Reza Khatib Zadeh Davani (2024)
Tribocorrosion behavior of the ZK60Gd alloy after quench control heat treatment Xueyi Wang, Junru Liu, Miao Huang, Yu Zheng, Jun Yang, Mohammad Ali Mohtadi Bonab, Morteza Tayebi, Xiiongbo Dong, Na Li (2024)
Co-electrodeposition of superhydrophobic NiCo/CeO2 coating with hierarchical nano/micro structure for corrosion protection of plain carbon steel Leila Fathyunes, Mohammad Ali Mohtadi Bonab (2024)
Influence of spheroidized cementite on ferritic matrix boundary characteristics and mechanical behavior in commercial carbon steels Mohammad Masoumi, Mohammad Ali Mohtadi Bonab, Rodrigo C.P. Loureiro, Jorge L. Cardoso, Miloslav Beres, Hamilton Ferreira Gomes de Abreu (2024)
Analysis of crystallographic orientation and crack behavior in armor wire with spheroidized pearlite: Simulation and modeling with linear elastic fracture mechanics Mohammad Masoumi, Rodrigo C.P. Loureiro, Mohammad Ali Mohtadi Bonab, Miloslav Beres, Hamilton Ferreira Gomes de Abreu (2024)
Effect of Electrochemical Hydrogen Charging on Hydrogen Embrittlement and Mechanical Properties of Quenched Tempered X100 Pipeline Steel Reza Khatib Zadeh Davani, Mohsen Montazeri, Mohammad Ali Mohtadi Bonab, Sandeep Yadav, Jhon Freddy Aceros Cabezas, Jerzy A. Szpunar (2024)
The effects of graphene oxide addition on low velocity impact performance of aramid fiber reinforced epoxy composites Farzin Azimpour shishevan, Mohammad Ali Mohtadi Bonab, Bahman Rahmatinejad (2024)
Experimental observations of nucleation and crack growth paths of hydrogen-induced cracking in pipeline steel Mohsen Montazeri, Jorge Luis Gonzalez Velazquez, Mohammad Ali Mohtadi Bonab, Diego Rivas Lopez, Manuel Alejandro Beltran Zuniga, Jerzy A. Szpunar, Reza Khatib Zadeh Davani (2023)
Rupture analysis of 12Cr1MoV super-heater tubes in power plants Mohammad Ali Mohtadi Bonab, Vahid Javaheri, Farzad Totonchi-Maleki (2023)
Effect of combined cold deformation and subsequent heat treatment on the microstructure, texture, mechanical properties and cementite spheroidization in AISI 1070 steel Mohammad Masoumi, Mohammad Ali Mohtadi Bonab, Jorge L. Cardoso, Ladislav Novotny, Rodrigo C.P. Loureiro, Hamilton Ferreira Gomes de Abreu, Miloslav Beres, Perdo H. Penheiro (2023)
Effect of Quench Tempering on Hydrogen Embrittlement and Corrosion Behavior of X100 Pipeline Steel Reza Khatib Zadeh Davani, Mohammad Ali Mohtadi Bonab, Sandeep Yadav, Ehsan Entezari, Jhon Freddy Aceros Cabezas, Jerzy A. Szpunar (2023)
Different aspects of hydrogen diffusion behavior in pipeline steel Mohammad Ali Mohtadi Bonab, Mohammad Masoumi (2023)
Effects of introducing CNTs and GPLs on mechanical, modal, thermal, and water uptake properties of twill basalt fiber-reinforced epoxy matrix composites Farzin Azimpour shishevan, Hamit Akbulut, Mohammad Ali Mohtadi Bonab, Bahman Rahmatinejad (2023)
A Review on the Corrosion and Fatigue Failure of Gas Turbines Leila Fathyunes, Mohammad Ali Mohtadi Bonab (2023)
Low velocity impact behavior of twill basalt/epoxy composites modified by graphene nanoparticles Farzin Azimpour shishevan, Mohammad Ali Mohtadi Bonab, Hamit Akbulut, Bahman Rahmatinejad (2023)
Improvement of tensile properties by controlling the microstructure and crystallographic data in commercial pearlitic carbon-silicon steel via quenching and partitioning (Q&P) process Mohammad Ali Mohtadi Bonab, Edwan A. Ariza, Rodrigo C.P. Loureiro, Dany Centeno, Felipe M. Carvalho, Mohammad Masoumi, Julian A. Avila (2023)
The influence of addition of carbon nanotube and graphene platelets on characteristics of carbon/basalt fiber reinforced intra-ply hybrid composites Farzin Azimpour shishevan, Mohammad Ali Mohtadi Bonab, Hamit Akbulut (2023)
Progressive failure analysis and taguchi-based optimisation of filament-wound composite tubes subjected to internal pressure using continuum damage mechanics approach Masoume Azizian, Mohammad Azizian, Babak Abazadeh, Mohammad Ali Mohtadi Bonab (2022)
An experimental study on the effects of introducing carbon nanotube on low velocity impact behavior of carbon/aramid fiber reinforced intra-ply hybrid composites Farzin Azimpour shishevan, Mohammad Ali Mohtadi Bonab (2022)
Effect of Active Flux on Aluminum 6061 and its Mechanical Properties by Gas Tungsten Arc Welding Process Razzagh Ajezi-Sardroud, Amir Mostafapour, Farhad Ajezi-Sardroud, Mohammad Ali Mohtadi Bonab (2022)
Effect of different parameters on hydrogen affected fatigue failure in pipeline steels Mohammad Ali Mohtadi Bonab (2022)
Macro‑texture and Micro‑texture Evolution at Different Stages of Manufacturing of Hot‑Rolled Ribbed High‑Strength Rebars Mohammad Ali Mohtadi Bonab (2022)
A Comparative Investigation of the Effect of Microstructure and Crystallographic Data on Stress-Oriented Hydrogen Induced Cracking Susceptibility of API 5L X70 Pipeline Steel Mohammad Ali Mohtadi Bonab, Edwan Anderson Ariza-Echeverri, Mohammad Masoumi (2022)
Failure analysis in API X70 pipeline steel in sour environment with an emphasis on fracture surfaces and crack propagation Mohammad Ali Mohtadi Bonab, Mohammad Masoumi, Jerzy A. Szpunar (2022)
Effect of thermo-mechanical controlled process on microstructural texture and hydrogen embrittlement resistance of API 5L X70 pipeline steels in sour environments Reza Pourazizi, Mohammad Ali Mohtadi Bonab, Reza Khatib Zadeh Davani, Jerzy A. Szpunar (2021)
Evolution of microstructure and texture in pipeline steels at different TMCP procedures with regard to hydrogen induced cracking Reza Pourazizi, Reza Khatib Zadeh Davani, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2021)
A comparative fracture analysis on as-received and electrochemically hydrogen charged API X60 and API X60SS pipeline steels subjected to tensile testing Mohammad Ali Mohtadi Bonab, Mohammad Masoumi, Jerzy A. Szpunar (2021)
Effect of Friction Stir Welding on the Microstructure and Mechanical Properties of Super Duplex Stainless Steel Seyed mohammad Ahle sarmadi, Mortaza Shamanian, Hossein Edris, Amir Behjat, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2021)
A novel strategy for comparative numerical analysis of the response of buried composite and steel pipes subjected to realistic loading scenarios: FEA in cooperation with Taguchi approach Masoume Azizian, Mohammad Azizian, Gholamreza Rashed, Mohammad Ali Mohtadi Bonab, Babak Abazadeh (2021)
Thermal shock behavior of twill woven carbon fiber reinforced polymer composites Farzin Azimpour shishevan, Hamit Akbulut, Mohammad Ali Mohtadi Bonab (2021)
Synergetic effects of carbon nanotube and graphene addition on thermo-mechanical properties and vibrational behavior of twill carbon fiber reinforced polymer composites Farzin Azimpour shishevan, Hamit Akbulut, Mohammad Ali Mohtadi Bonab (2020)
Finite element modeling of HIC propagation in pipeline steel with regard to experimental observations Mohammad Ali Mohtadi Bonab, Hojjat Mousavi, Reza Pourazizi, Jerzy A. Szpunar (2020)
Role of texture and inclusions on the failure of an API X70 pipeline steel at different service environments Reza Pourazizi, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2020)
Effect of thermal cycling on mechanical and thermal properties of basalt fibre-reinforced epoxy composites Farzin Azimpour shishevan, Hamid Akbulut, Mohammad Ali Mohtadi Bonab (2020)
Mechanical and Thermal Properties of Carbon/Basalt Intra-ply Hybrid Composites. I. Effect of Intra-ply Hybridization Farzin Azimpour shishevan, Hamit Akbulut, Mohammad Ali Mohtadi Bonab (2020)
Presenting a new model for performance measurement of the sustainable supply chain of Shoa Panjereh Company in different provinces of Iran (case study) Alireza Karimi, Saeed Jafarzadeh-Ghoushchi, Mohammad Ali Mohtadi Bonab (2020)
Investigation of different failure modes in oil and natural gas pipeline steels Reza Pourazizi, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2020)
A comparative study of the role of hydrogen on degradation of the mechanical properties of API X60, X60ss, and X70 pipeline steels K M Mostafijur Rahman, Mohammad Ali Mohtadi Bonab, R. Ouellet, Jerzy A. Szpunar (2019)
Effects of different parameters on initiation and propagation of stress corrosion cracks in pipeline steels: A review Mohammad Ali Mohtadi Bonab (2019)
Effect of electrochemical hydrogen charging on an API X70 pipeline steel with focus on characterization of inclusions K M Mostafijur Rahman, Mohammad Ali Mohtadi Bonab, R. Ouellet, Jerzy A. Szpunar, Ning Zhu (2019)
Texture and microstructure development of tensile deformed high-Mn steel during early stage of recrystallization Mostafa Eskandari, Mohammad Ali Mohtadi Bonab, Abbas Zarei-Hanzaki, Jerzy A. Szpunar, Ritwik Basu (2019)
Important Factors on the Failure of Pipeline Steels with Focus on Hydrogen Induced Cracks and Improvement of Their Resistance: Review Paper Mohammad Ali Mohtadi Bonab, Hadi ghesmati-kucheki (2019)
The effect of thermal shock cycling on low velocity impact behavior of carbon fiber reinforced epoxy composites Farzin Azimpour shishevan, Hamid Akbulut, Mohammad Ali Mohtadi Bonab (2019)
Microstructural aspects of intergranular and transgranular crack propagation in an API X65 steel pipeline related to fatigue failure Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, Mohsen Sanayei, Sreekanta Das (2018)
Investigation on the microstructure—mechanical property correlation in dissimilar steel welds of stainless steel SS 304 and medium carbon steel EN 8 Dilip Kumar Singh, Gadadhar Sahoo, Ritwik Basu, Vikram Sharma, Mohammad Ali Mohtadi Bonab (2018)
High-strain-rate deformation behaviour of new high-Mn austenitic steel during impact shock-loading Mostafa Eskandari, Mohammad Ali Mohtadi Bonab, Mahdi Yeganeh, Jerzy A. Szpunar, Akindele Odeshi (2018)
Role of cold rolled followed by annealing on improvement of hydrogen induced cracking resistance in pipeline steel Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, Jerzy A. Szpunar (2018)
EBSD Study of Deformation Microstructure of an As-Homogenized Austenitic Mn Steel after Hot Compression Mostafa Eskandari, Mohammad Ali Mohtadi Bonab, Abbas Zarei-Hanzaki, Jerzy A. Szpunar, Leo Pentti Karjalainen (2018)
Effect of Hot Deformation on Texture and Microstructure in Fe-Mn Austenitic Steel During Compression Loading Mostafa Eskandari, Mohammad Ali Mohtadi Bonab, Abbas Zarei-Hanzaki, Seyed Mahmood Fatemi (2018)
s and Inclusions, Texture of Role and Initiation Crack Induced Hydrogen in Steels Pipeline X70 API in Propagation Mohammad Ali Mohtadi Bonab (2017)
A focus on different factors affecting hydrogen induced cracking in oil and natural gas pipeline steel Mohammad Ali Mohtadi Bonab (2017)
Erratum to: Low Velocity Impact Behavior of Basalt Fiber-Reinforced Polymer Composites Farzin Azimpour shishevan, Hamid Akbulut, Mohammad Ali Mohtadi Bonab (2017)
Effect of Different Microstructural Parameters on Hydrogen Induced Cracking in an API X70 Pipeline Steel Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, Rahim Karim dadashi, Jerzy A. Szpunar (2017)
Use of Geometric Modifications to Improve Fracture Force in Edge-Cracked Specimens Tajbakhsh Navid Chakherlou, V. Valimohammadi-Bonab, Mohammad Ali Mohtadi Bonab (2017)
Effect of arisen dislocation density and texture components during cold rolling and annealing treatments on hydrogen induced cracking susceptibility in pipeline steel Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, Jerzy A. Szpunar (2016)
Effect of Microstructural Parameters on Fatigue Crack Propagation in an API X65 Pipeline Steel Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, Hossein Ghaednia, Sreekanta Das (2016)
Grain-orientation-dependent of γ–ε–α′ transformation and twinning in a super-high-strength, high ductility austenitic Mn-steel Mostafa Eskandari, Abbas Zarei-Hanzaki, Mohammad Ali Mohtadi Bonab, Yusuke Onuki, Ritwik Basu, Jerzy A. Szpunar, Abazar Asghari (2016)
Effect of Microstructure and Texture on Anisotropy and Mechanical Properties of SAE 970X Steel Under Hot Rolling Mohammad Masoumi, Mohammad Ali Mohtadi Bonab, Hamilton Ferreira Gomes de Abreu (2016)
Evolution of the microstructure and texture of X70 pipeline steel during cold-rolling and annealing treatments Mostafa Eskandari, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2016)
Hydrogen-Induced Cracking Assessment in Pipeline Steels Through Permeation and Crystallographic Texture Measurements Mohammad Ali Mohtadi Bonab, Rahim Karim dadashi, Mostafa Eskandari, Jerzy A. Szpunar (2016)
An extensive study of hydrogen-induced cracking susceptibility in an API X60 sour service pipeline steel Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, K M Mostafijur Rahman, R. Ouellet, Jerzy A. Szpunar (2016)
Role of microstructure on phase transformation behavior in NieTieFe shape memory alloys during thermal cycling Ritwik Basu, Mohammad Ali Mohtadi Bonab, Xu Wang, Mostafa Eskandari, Jerzy A. Szpunar (2015)
A systematic investigation on the role of microstructure on phase transformation behavior in Ni–Ti–Fe shape memory alloys Ritwik Basu, Mostafa Eskandari, Lalit Upadhayay, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2015)
Microstructural investigation on marforming and conventional cold deformation in Ni–Ti – Febased shape memory alloys Ritwik Basu, Jerzy A. Szpunar, Mostafa Eskandari, Mohammad Ali Mohtadi Bonab (2015)
Microstructure and texture evolution in 21Mn–2.5Si–1.6Al–Ti steel subjected to dynamic impact loading Mostafa Eskandari, Abbas Zarei-Hanzaki, Mohammad Ali Mohtadi Bonab, Akindele Odeshi, Jerzy A. Szpunar (2015)
In-situ strain localization analysis in low density transformation-twinning induced plasticity steel using digital image correlation Mostafa Eskandari, Mohammadreza Yadegari, Abbas Zarei-Hanzaki, Mohammad Ali Mohtadi Bonab, Ritwik Basu, Jerzy A. Szpunar (2015)
The mechanism of failure by hydrogen induced cracking in an acidic environment for API 5L X70 pipeline steel Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar, Ritwik Basu, Mostafa Eskandari (2015)
Texture, local misorientation, grain boundary and recrystallization fraction in pipeline steels related to hydrogen induced cracking Mohammad Ali Mohtadi Bonab, Mostafa Eskandari, Jerzy A. Szpunar (2015)
Texture Development of ARB-Processed Steel-Based Nanocomposite Roohollah Jamaati, Mohammad Reza Toroghinejad, Mohammad Ali Mohtadi Bonab, Hossein Edris, Jerzy A. Szpunar, Mohammad Reza Salmani (2014)
Preferred Crystallographic Orientation Development in Nano/Ultrafine-Grained 316L Stainless Steel During Martensite to Austenite Reversion Mostafa Eskandari, Mohammad Ali Mohtadi Bonab, Ritwik Basu, Majid Nezakat, Shreyans Nahar, Amir Hossein Baghpanah (2014)
Microstructure evolution and mechanical behavior of a new microalloyed high Mn austenitic steel during compressive deformation Mostafa Eskandari, Abbas Zarei-Hanzaki, Jerzy A. Szpunar, Mohammad Ali Mohtadi Bonab, Ali Reza Kamali, Mohammad Reza Salmani (2014)
Strain Hardening During Hot Compression Through Planar Dislocation and Twin-Like Structure in a Low-Density High-Mn Steel Mostafa Eskandari, Abbas Zarei-Hanzaki, Ali Reza Kamali, Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar (2014)
The effect of SiC nanoparticles on deformation texture of ARB-processed steel-based nanocomposite Roohollah Jamaati, Mohammad Reza Toroghinejad, Mohammad Ali Mohtadi Bonab, Ghader Hosseinzadeh, Jerzy A. Szpunar, Mohammad Reza Salmani (2014)
Comparison of microparticles and nanoparticles effects on deformation texture of steel-based composite and nanocomposite fabricated by the ARB process Roohollah Jamaati, Mohammad Reza Toroghinejad, Mohammad Ali Mohtadi Bonab, Hossein Edris, Jerzy A. Szpunar, Mohammad Reza Salmani (2014)
Evaluation of hydrogen induced cracking behavior of API X70 pipeline steel at different heat treatments Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar, Laurie E. Collins, R. Stankievech (2014)
Hydrogen induced cracking susceptibility in different layers of a hot rolled X70 pipeline steel Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar, Seyed Salman Razavi-Tousi (2013)
A comparative study of hydrogen induced cracking behavior in API 5L X60 and X70 pipeline steels Mohammad Ali Mohtadi Bonab, Jerzy A. Szpunar, Seyed Salman Razavi-Tousi (2013)
Investigation of Fatigue Crack Propagation in Spot-Welded Joints Based on Fracture Mechanics Approach Soran Hassanifard, Mohammad Ali Mohtadi Bonab, Ghader Jabbari (2013)
Excitation of Rayleigh-Benard Convection in Homeotropic Nematic Liquid Crystal by a Gaussian Laser Beam from Above Jafar Poursamad Bonab, Mohammad Asadpour, Keivan Mahmoudi-Aghdami, Mostafa Sahrai, R. S. Hakopyan, Mohammad Ali Mohtadi Bonab (2012)

Research interests

  • Fracture and failure analysis
  • Materials characterization
  • Corrosion
More
Powered By Jiro