2025 : 10 : 14
فارسی
Tohid Adibi

Tohid Adibi

Academic rank: Associate Professor
ORCID:
Education: PhD.
ScopusId:
HIndex: 0/00
Faculty: Faculty of Engineering
Address:
Phone: 04137745000-1620
Home

Research activities

Journal Papers
Enhancing the heat transfer efficiency in heated tube with a novel multi-twisted blade Turbulators: A numerical analysis Tohid Adibi, Nemat Mashoofi Maleki, Ebrahim Tavousi, Amir Keshmiri (2025)
Optimizing heat exchanger efficiency through elastic vortex generators and oscillating walls in pulsating channel flows Tohid Adibi, Seyyed esmail Razavi, Shams Forruque Ahmed, Ahmad Alsharifi, Nehad Ali Shah, Hammad Alotaibi (2025)
Assessment of heat transfer efficiency through the application of transverse waves within a double tube heat exchanger Nemat Mashoofi Maleki, Tohid Adibi (2025)
Role of a Hinged Single Separator in Heat Transfer Enhancement and Drag Reduction in Circular Cylinder Flow Tohid Adibi, Seyyed esmail Razavi, Shams Forruque Ahmed, Suvash Saha, Nehad Ali Shah (2025)
Performance optimization of Maisotsenko cycle heat exchangers: A three-dimensional parametric analysis Seyyed esmail Razavi, Tohid Adibi, Mohanad Naji Halool Abohned, Shams Forruque Ahmed, Hammad Alotaibi (2025)
Effects of elastic walls on the thermal performance of a counter-flow heat exchanger Tohid Adibi, Seyyed esmail Razavi, Shams Forruque Ahmed, Shakhawan Mohammed Shakor, Gang Liu (2024)
Semi-analytical solution of nanofluid flow with convective and radiative heat transfer Seyyed esmail Razavi, Tohid Adibi (2024)
Predicting airfoil stalling dynamics using upwind numerical solutions to non-viscous equations Tohid Adibi, Seyyed esmail Razavi, Shams Forruque Ahmed, hosein hasan pour, Suvash Saha, S. m. Muyeen (2023)
Numerical investigation of multi-designed mufflers in internal combustion engines for noise reduction Tohid Adibi, Seyyed esmail Razavi, hosein hasan pour, Shams Forruque Ahmed, Nehad Ali Shah (2023)
Fluid-Structure-Acoustic coupling analysis for external laminar and turbulent fluid flows Tohid Adibi, Seyyed esmail Razavi, Shams Forruque Ahmed, hosein hasan pour, Neda Mohammadzadeh, S. m. Muyeen (2023)
Fluid Flow and Mixed Heat Transfer in a Horizontal Channel with an Open Cavity and Wavy Wall Tohid Adibi, Shams Forruque Ahmed, Omid Adibi, hassan Athari, Irfan Anjum Badruddin, Syed Javed (2023)
Impact of Artificial Compressibility on the Numerical Solution of Incompressible Nanofluid Flow Tohid Adibi, Shams Forruque Ahmed, Seyyed esmail Razavi, Omid Adibi, Irfan Anjum Badruddin, Syed Javed (2022)
Thermodynamic and exergoeconomic analyses of a novel solar-based externally fired biomass combined cycle with hydrogen production Anahita Moharamian, Tohid Adibi, Mohammad Ali Ghahremani, Saeed Soltani, Marc A. Rosen, Seyed Mohammad Seyed Mahmoudi (2022)
Numerical modeling of thermos-flow in a Trapezoidal Cavity containing different solid objects Tohid Adibi, Seyyed esmail Razavi, Omid Adibi, Saeed Soltani (2022)
Evaluation of the optimum pressures of gas turbines based on energy and exergy analyses Tohid Adibi, Omid Adibi, Suvash Saha (2022)
Characteristic-Based Fluid Flow Modeling between Two Eccentric Cylinders in Laminar and Turbulent Regimes Tohid Adibi, Seyyed esmail Razavi, Shams Forruque Ahmed, Aria Amrikachi, Suvash Saha (2022)
Evaluation of the optimum pressure of the intercool-er and the regenerator in the Bryton cycle based on exergy and energy analysis Tohid Adibi, Omid Adibi (2021)
The response of nano-ceramic doped fluids in heat convection models: A characteristics-based numerical approach Tohid Adibi, Seyyed esmail Razavi, Omid Adibi, Mohammad Vajdi, Farhad Sadegh Moghanlou (2021)
Sensitivity analysis on the thermal performance of a gas heater with finned and finless tubes using the characteristics-based method Seyyed esmail Razavi, Tohid Adibi, hosein hasan pour (2021)
Thermo-flow Analysis of Cylinder with Crossed Splitter Plates with a Characteristics-based Scheme Seyyed esmail Razavi, Tohid Adibi, hosein hasan pour (2021)
Impact of inclined and perforated bafes on the laminar thermo‑fow behavior in rectangular channels Seyyed esmail Razavi, Tohid Adibi, saman faramarzi (2020)
A characteristic-based numerical simulation of water-titanium dioxide nano-fluid in closed domains Tohid Adibi, Seyyed esmail Razavi, Omid Adibi (2020)
Laminar Forced Convection Simulation at Different Boundary Conditions with Averaging Scheme (Numerical and Theoretical Research) Tohid Adibi, Omid Adibi (2019)
A characteristic-based solution of forced and free convection in closed domains with emphasis on various fluids Tohid Adibi, Omid Adibi, Seyyed esmail Razavi (2019)
Experimental investigation about drag force on the both icy and non-icy airfoils Tohid Adibi (2019)
Three-dimensional characteristic approach for incompressible thermo-flows and influence of artificial compressibility parameter Tohid Adibi (2018)
Evaluation of using solar ammonia absorption cooling system for major cities of the Middle East Tohid Adibi (2018)
Comparative study of upwind and averaging schemes with artificial dissipation for numerical solution for quasi-one-dimensional supersonic flow Tohid Adibi, Aria Amrikachi (2018)
Investigation on the possibility of substituting compression cooling cycle with a solar absorption cooling cycle in tropical regions of Iran Tohid Adibi, Omid Adibi, Aria Amrikachi (2017)
A Novel Multidimensional Characteristic Modeling of Incompressible Convective Heat Transfer. Seyyed esmail Razavi, Tohid Adibi (2016)
A Novel Multi-dimensional Characteristic Modeling of Incompressible Convective Heat Transfer Tohid Adibi, Seyyed esmail Razavi (2015)
A new characteristic approach for incompressible thermo-flow in Cartesian and non-Cartesian grids Tohid Adibi, Seyyed esmail Razavi (2015)
Conference Papers
Powered By Jiro