Poly(vinyl chloride)(PVC) hollow fiber membranes (HFMs) are considered for the firsttime to capture carbon dioxide (CO2) in a gas-liquid contacting process. To this end, PVC HFMs are produced from PVC/NMP
solutions with concentration of 20 wt.% based on liquid–liquid phase separation. This is accomplished by
changing the take-up speed during spinning process to produce HFMs with different structures. It was
found PVC HFMs are promising candidates for CO2 absorption with capacity comparable to that of other
hydrophobic polymers such as PVDF, PTFE and PP. In addition, this polymer is more advantageous due
to its low cost and good processability. The results also reveal the great contribution of higher flow rate
of liquid absorbent, i.e. water, on efficiency of CO2 absorption. Furthermore, the CO2 capture efficiency
of PVC HFMs is predominantly determined as a result of trade-off between effects of increasing take-up
speed including increased orientation of PVC chains and increased corrugations in the inner contour of
HFM along with reduced wall thickness and mean pore size of PVC HFMs. This implies an optimum takeup speed is required to achieve highly effective CO2 capture. Additionally, the influence of water flow
rate on efficiency of CO2 absorption becomes more pronounced for HFMs produced under the optimum
take-up speed.