Mehdi Shaban Ghazani

Research activities

Journal Papers

Prediction of the flow behaviour of AISI 321 austenitic stainless steel during dynamic recovery using sine hyperbolic constitutive equation and artificial neural network Mehdi Shaban Ghazani, Akbar Vajd, Keyhan HosSein Nejad (2025)

An interpretable stacking machine-learning model to predict the hot torsion flow characteristics of a micro-alloyed steel Hojjat Emami, Mehdi Shaban Ghazani (2025)

Application of Artificial Neural Network to Predict the Hot Flow Behavior of Ti-Nb Microalloyed Steel During Hot Torsion Deformation Mehdi Shaban Ghazani (2022)

Comparison of Corrosion Behavior between Fine-Grained and Coarse-grained Fe-18.5% Cr Ferritic Stainless Steel in 0.01 M NaOH Solution Hadi Irani, Mehdi Shaban Ghazani (2022)

Finite Element Analysis of the Non-Equal Channel Angular Pressing (NECAP) with Different Die Geometries Ali Fardi Ilkhchy, Mehdi Shaban Ghazani (2021)

Strain hardening behavior, strain rate sensitivity and hot deformation maps of AISI 321 austenitic stainless steel Mehdi Shaban Ghazani, Beitallah Eghbali (2021)

Effect of processing by high temperature Ex-ECAP on the microstructure, work hardening behavior and electrochemical properties of Ti-Nb microalloyed steel Mehdi Shaban Ghazani, Hadi Irani, Seyyed Hasan Mohitfar (2021)

Deformation homogeneity of extruded AA7075 alloy during subsequent ECAP Mehdi Shaban Ghazani (2020)

Effect of grain refnement on tensile properties and electrochemical behavior of Fe-18.5%Cr ferritic stainless steel Hadi Irani, Mehdi Shaban Ghazani (2020)

Modeling the ﬂow behavior of AISI 321 austenitic stainless steel using a simple combined phenomenological method Mehdi Shaban Ghazani, Beitallah Eghbali (2019)

Photocatalytic activity and antibacterial behavior of TiO2 coatings co-doped with copper and nitrogen via sol–gel method Nasim Tahmasebizad, Mohammad Taghi Hamedani, Mehdi Shaban Ghazani, Yaghoub Pazhuhanfar (2019)

Prediction of Post-deformation Recrystallization Kinetics in AISI 321 Austenitic Stainless Steel Using Double-Stage Hot Compression Mehdi Shaban Ghazani, Beitallah Eghbali (2019)

Effect of Pressure on Microstructure and Cooling Curves of A356 Aluminum Alloy During Solidification Ali Fardi Ilkhchy, Behzad Binesh, Mehdi Shaban Ghazani (2019)

Plastic Deformation Characteristics of Continuous Confined Strip Shearing Process Considering the Deformation Homogeneity and Damage Accumulation Mehdi Shaban Ghazani (2019)

Microstructural evolution and mechanical properties of thixoformed 7075 aluminum alloy prepared by conventional and new modified SIMA processes Behzad Binesh, Mehrdad Aghaie-Khafri, Mehdi Shaban Ghazani, Ali Fardi Ilkhchy (2018)

Effect of post deformation annealing on the microstructure and mechanical properties of cold rolled AISI 321 austenitic stainless steel Hesam Rezayi, Mehdi Shaban Ghazani, Beitallah Eghbali (2018)

Analysis of the Plastic Strain Distribution and Damage Accumulation During T-Shaped Equal Channel Angular Pressing Mehdi Shaban Ghazani, Ali Fardi Ilkhchy, Behzad Binesh (2018)

Characterization of the hot deformation microstructure of AISI 321 austenitic stainless steel Mehdi Shaban Ghazani, Beitallah Eghbali (2018)

Effect of Strain Rate Sensitivity and Strain Hardening Exponent of Materials on Plastic Strain Distribution and Damage Accumulation During Equal Channel Angular Pressing Mehdi Shaban Ghazani, Behzad Binesh, Ali Fardi Ilkhchy (2018)

Finite element simulation of the T-shaped ECAP processing of round samples Mehdi Shaban Ghazani, Ali Fardi Ilkhchy, Behzad Binesh (2018)

A Ductile Damage Criterion for AISI 321 Austenitic Stainless Steel at Different Temperatures and Strain Rates Mehdi Shaban Ghazani, Beitallah Eghbali (2018)

Plastic Deformation Characteristics of the Rotary ECAP with Two Different Routes Mehdi Shaban Ghazani, Mohammad Reza Akbarpour (2017)

The Effect of Inner Corner Radius of ECAP Die on Strain Distribution and Damage Accumulation in Deformed Sample Mehdi Shaban Ghazani, Sajjad Moslemi (2017)

Kinetics and Critical Conditions for Initiation of Dynamic Recrystallization During Hot Compression Deformation of AISI 321 Austenitic Stainless Steel Mehdi Shaban Ghazani, Beitallah Eghbali, Gholamreza ebrahimi (2017)

Evaluation of the Kinetics of Dynamic Recovery in AISI 321 Austenitic Stainless Steel Using Hot Flow Curves Mehdi Shaban Ghazani, Beitallah Eghbali, Gholamreza ebrahimi (2017)

Finite Element Simulation of Flow Localization During Equal Channel Angular Pressing Mehdi Shaban Ghazani, Akbar Vajd (2017)

Plastic deformation of 7075 Aluminum Alloy using Integrated Extrusion-Equal Channel Angular Pressing Mehdi Shaban Ghazani, Sahel Gozalzadeh, Beitallah Eghbali (2016)

PREDICTION OF CRITICAL STRESS AND STRAIN FOR THE ONSET OF DYNAMIC RECRYSTALLIZATION IN PLAIN CARBON STEELS Mehdi Shaban Ghazani, Akbar Vajd, Bashir Moseddegh (2015)

3D finite element study of temperature variations during equal channel angular pressing Mehdi Shaban Ghazani, Akbar Vajd, Bashir Moseddegh (2014)

Effect of integrated extrusion–equal channel angular pressing temperature on microstructural characteristics of low carbon steel Beitallah Eghbali, Mehdi Shaban Ghazani (2013)

Finite element simulation of cross equal channel angular pressing Mehdi Shaban Ghazani, Beitallah Eghbali (2013)

warm deformation of low carbon steel using forward extrusion-equal channel angular pressing technique Beitallah Eghbali, Mehdi Shaban Ghazani (2013)

Effect of Hot Torsion Parameters on Development of Ultrafine Ferrite Grains in Microalloyed Steel Beitallah Eghbali, Mehdi Shaban Ghazani (2012)

Pressure induced martensite transformation in plain carbon steel Mehdi Shaban Ghazani, Beitallah Eghbali (2011)

Warm deformation microstructure of a plain carbon steel Beitallah Eghbali, Mehdi Shaban Ghazani (2011)

Dynamic Strain Induced Transformation of Austenite to Ferrite during High Temperature Extrusion of Low Carbon Steel Mehdi Shaban Ghazani, Sahel Gozalzadeh, Beitallah Eghbali (2011)

Determination of critical conditions for dynamic recrystallization of a microalloyed steel Mehdi Shaban Ghazani, Beitallah Eghbali (2010)

Conference Papers

Finite element simulation of ECAP with double curvature Mehdi Shaban Ghazani (2021)

Predicting the yield ratio of reversion annealed austenitic stainless steels Mehdi Shaban Ghazani, Hesam Rezayi (2021)

Tow dimensional finite element analysis of the cross channel angular pressing (Cross-ECAP) Mehdi Shaban Ghazani (2020)

Impact of grain refinement on electrochemical behavior of ferritic stainless steel in alkaline solution Hadi Irani, Mehdi Shaban Ghazani (2020)

Deformation characteristics of AA6063 alloy during ECAP in parallel channels Mehdi Shaban Ghazani, Hadi Irani (2020)

Processing of 7075 aluminum based composite using a combination of hot pressing and accumulative roll bonding Keyhan HosSein Nejad, Beitallah Eghbali, Mehdi Shaban Ghazani (2019)

Effect of grain refinement on electrochemical behavior of Fe-18.5%Cr ferritic stainless steel in 0.1 M HNO3 solution Hadi Irani, Mehdi Shaban Ghazani (2018)

Nucleation and growth of Fe, Pt and Fe-Pt on glassy carbon substrate Ali Fardi Ilkhchy, Mehdi Shaban Ghazani, Behzad Binesh, Farzad Nasirpouri (2018)

.row3_default .researchActivities .researchTypeContent { opacity: 1; position: static; height: initial; } .row3_default .researchActivities .researchActivitiesWrapper .researchTypeTitle { visibility: visible; font-family: Arial; font-size: 1.3rem; transition: background-color .5s, color .5s; display: block; float: left; color: rgb(102, 102, 102); background-color: rgb(255, 255, 255); direction: ltr; text-align: left; padding: .5% 2%; cursor: pointer; border-radius: 5%; margin-top: 1%; } .row3_default .researchActivities .researchTypeContent table .Gv-Empty { text-align: left; direction: ltr; }

Research interests

Recovery and Recrystallization in Metals and Alloys
Finite Element Simulation
Austenitic Stainless Steels
Ultra-fine Grained and Nanostructured Materials
Thermomechanical Processing of Metals and Alloys
Metal Forming

Mehdi Shaban Ghazani

Research activities

Research interests

Scientific Societies Membership

Links